Skip to content

CCT Everywhere

Representative markets we serve
Close-up of a healthcare provider’s hand attaching an ECG electrode lead wire onto a circular adhesive sensor pad on a patient’s chest, set against a blue-gradient overlay.

Our customer-first philosophy is what bonds us

Tapes for Automotive Specifications

CCT’s pressure sensitive tapes are approved for many automotive OEM specifications – Ford, Chrysler, Toyota, and more. Many incorporate Low VOC formulations that help the automotive industries respond to changing consumer and regulatory trends. Our adhesive solutions can be customized to meet any need.

We offer acrylic and synthetic rubber adhesives and a wide range of foams, films, and other substrates.

Resistance to plasticizers, temperature extremes, chemicals, water, and UV light.

Adhesion to textured or irregular surfaces.

CCT offers a variety of pressure sensitive tape and adhesive solutions for the transportation and recreational vehicle industry. Many products incorporate Low VOC formulations that help respond to changing consumer and regulatory trends. Our solutions can be customized to meet any need.

We offer acrylic and synthetic rubber adhesives and a wide range of foams, films, and other substrates.

Resistance to plasticizers, temperature extremes, chemicals, water, and UV light.

Adhesion to textured or irregular surfaces.

Tapes for Transportation Vehicles

Tapes for Building & Construction

Indoors and out, CCT offers a variety of high performance, pressure sensitive tapes and adhesive solutions in roofing and flooring underlayment, as well as mechanical insulation and HVAC applications.  From our AAMA conforming Glazing tape products to our skirt tapes, we have you covered.

We offer acrylic and synthetic rubber adhesives and a wide range of foams, films, and other substrates.

Resistance to plasticizers, temperature extremes, chemicals, water, and UV light.

Adhesion to textured or irregular surfaces.

High Quality Siliconized Papers & Films

Our stock release liners are available in small minimum order quantities in full web width as well as slit to order.

From patient to healthcare worker, pressure sensitive acrylic and rubber tapes from CCT (Coating & Converting Technologies) are used in a variety of medical applications. Our products can be found on medical wearables, device assembly, PPE, and other products that bond to a variety of substrates.

Acrylic & synthetic rubber adhesives and a wide range of foams, films & other substrates.

Tapes for Medical Applica­tions

Foam Tapes for Pediatric / Stress Electrodes & TENS Assemblies

Standard Polyethylene Foam

  • 2# 1/8” White and Black Available
  • 4# 1/16” White and Black Available
  • 6# 1/32” White and Black Available
  • Other Color & Density Options Available

Single & Double Coated Products

  • Acrylic

    MD5624 Single Coated

  • Acrylic

    MDF5003 Single Coated

  • Acrylic

    MDFT31235 Single Coated

    Single-sided 1/32" foam tape with high-performance acrylic adhesive. Designed for a variety of medical applications.

  • Acrylic

    SCFT1952 Single Coated

  • Acrylic

    MD5013 Single Coated

  • Acrylic

    MD5400 Single Coated

  • Acrylic

    MDFT3920 Single Coated

  • Acrylic

    MDFT5502 Single Coated

  • Acrylic

    MDFT7002B Single Coated

  • Acrylic

    MD5000 Single Coated

    Single-sided nonwoven tape with white 2.4 oz. PET spunlace for breathable applications. Used widely for medical stress electrodes, pads, and covers requiring breathability.

  • Acrylic

    MDFT4502 Single Coated

  • Acrylic

    SCFT1921 Single Coated

Long Term 21-Day Wear Adhesive

Coating & Converting

Low VOC Tapes

For Automotive Applications

The adhesives are developed to bond a wide variety of substrates including technical foams, plastics, metals, non-woven fibers, and fabrics. The bonding of low surface energy substrates is also possible. Applications include acoustic insulation, HVAC seals, gaskets, electrical devices, seats, doors, anti rattle tapes, spacers, decorative trims, pillars, roofs, headliners, and others.

A 3D wireframe model of a modern sedan car rendered in white lines against a solid black background, showing its structural grid layout.

According to VDA 278 analysis, CCT’s adhesive tapes do not contain any single substances restricted by the GB 27630 regulation (China), the indoor concentration guideline by JAMA (Japanese Automobile Manufacturers Association), or the Japanese Ministry of Health, Labor, and Welfare (MHLW).

  • Available widths 0.5 – 90in, depending on product thickness and roll length. Available lengths up to 16,000If depending on product thickness (max roll diameter 47in).
  • Note: Information is subject to change. Values are guidelines and must not be considered as the product specification. Contact CCT for the latest technical information.
  • Customized developments on request / also toll coatings on customer materials.
  • Different thicknesses, product constructions upon request.

Product Carrier Thickness (mil) VOC VDA 278 (μg/g) Fogging VDA 278 (μg/g) Formaldehyde VDA 275 (mg/kg)
S-4610 AG Scrim 4 33 194 <1
S-4610 ZE Scrim 4 25 108 <1
S-4210 AG Tissue 4 34 225 <1
S-4710 AG Transfer 4 44 238 <1

Test Method VDA 278

The Automotive Industry utilizes a test method, VDA 278, by which VOC and FOG emissions are measured. CCT’s Low Emission Adhesive Tapes are designed and engineered to meet the target values set forth by each OEM.

Precise tape coating

CCT’s coating operation utilizes slot die coating heads capable of precise coat weight control. Our capabilities include (melting) hot-melt adhesive products, solvent-based adhesives, and coatings. Critical aspects of the process include coat weight, line speeds, oven temperatures, and air flow which are governed by industry standard process controls. CCT’s team must adhere to, including staging raw materials, applying adhesive to the substrate, and winding the product, all while regularly inspecting throughout.

Product Testing

ISO 17025 accredited lab, on location
and Interact with CCT at any stage of production
A close-up shot of a large industrial manufacturing machine feeding a shiny roll of metallic silver foil or tape, with a soft blue gradient overlay across the bottom half of the image.

Save Money, Avoid Delays

Quality assurance is an essential part of CCT’s customer success process, no matter the application. The scope of our ISO 17025 certified lab covers 13 tests, conducted at our facility by highly skilled technical service engineers, for adhesives and pressure-sensitive films and other materials. This saves time and money and eliminates the need for additional testing by in-house or third-party providers. Your specific requirements and QA factors can be met at CCT.

Certificate of Accreditation No. AT-1176 issued by the ANSI National Accreditation Board (ANAB). Valid to June 23, 2022. Fulfills the requirements of ISO/IEC 17025:2017. This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system.

Thorough Lab Tests Performed

Tests Equipment
Thickness TMI Digital Micrometer
Peel / Release IMass SP2000
Loop Tack Cheminstruments Loop Tack Tester
Probe Track Cheminstruments Probe Tack Tester
Shear ChemInst Shear RT-10
Creep Resistance N/A
Elongation / Tensile Instron Universal Tester
Temperature (38 to 260) ºC
Temperature / Humidity (-60 to 160) ºC (0 to 100) %RH
Objectionable Odor (Delphi) N/A
Static Shear (Delphi) N/A
Spray Impact Testing Type 1 Impact Penetration Tester
TA Tack Texture Analyzer (TA XT Plus)

Our Customer Success Process

CCT Customer Success Process
Stage 1: Customer Project Scope

Technical service engineers review your specifications and test in our ISO accredited 17025 lab for recommending the best product for your application. If our standard products in stock do not meet your requirements, they can quickly be modified or custom constructions can be engineered.

Stage 2: Product Design & Development

Experienced estimators, engineers, and chemists shape and test products in-house.

Stage 3: Product Qualification

Trials are performed on full-scale machinery to ensure quality is consistent with the end-product.

Stage 4: Full Production

The coating and converting process is initiated with supporting review and opportunities for real-time conferencing.

Stage 5: Quality & Assurance

Ongoing testing is performed in our ISO 17025 accredited lab to ensure quality and other needs are met. Learn more about the scope of our lab.

Stage 6: Ongoing Support

Your initial production includes our on-site support for seamless integration into your process.

Let's bond

Tell us about your product needs.